Why proper sizing of your battery is so important
The pattern we see time and again
When analysing existing installations, the same scenario keeps coming back. A household with solar panels and a home battery of 7 to 11 kWh sees the battery at 100% around 1pm on sunny days. From that moment the panels keep producing, but all the surplus flows to the grid. In the evening, when hob, dishwasher, heat pump and EV charging coincide, that same battery is often empty by around 9pm, and that is precisely when power has to be bought in again, often at the hour when electricity is most expensive.
The core problem: energy you produced yourself, you give away to the grid in the afternoon, and a few hours later you buy comparable energy back at market price. Trading unfavourably twice, on the same day, with the same power. On a curve of consumption, sun and battery level you can see this clearly: with 11 kWh of storage the battery is already full at 1pm, and the solar energy produced after that largely flows unused to the grid.
What do you actually lose because of that?
Two things at once. First and foremost: the kWh you give away at midday you get today at low or even negative feed-in rates. Sunday 26 April was a textbook example, with day-ahead prices down to -41 cents per kWh, but every sunny weekend day between March and September shows a milder version of that same pattern. On top of that, you buy the same kWh back in the evening at a normal or high tariff. The gap between what you get for your fed-in power and what you pay for your purchased power has structurally grown: underuse is no longer cost-neutral, it is a direct bill.
In a market with rising and volatile prices, partly due to geopolitical tensions, control over when you use your own energy only becomes more important. A larger battery is not a luxury, it is your lever to keep that grip.
Protecting versus exploiting
For customers with a controllable inverter and MoMa control a first safety net is built in. When the battery is full and the feed-in price goes negative, MoMa automatically throttles the inverter or limits solar production at the source, so you do not pay to get rid of your own energy. But curtailment remains a defensive move: the solar energy produced is still lost, the loss just stays inside the house instead of at the grid.
With a generously sized battery the logic changes completely. MoMa can then proactively provide room in the battery before the midday peak, deliberately freeing up capacity, so that during the deep negative hours there is room to take power from the grid, for free, and on pronounced days such as 26 April even against payment. What was first a loss scenario becomes an earning scenario. The difference is not in the control, which is MoMa for everyone; it lies in the physical space for that control to work with.
Same day, different outcome
With an expansion to 22 kWh of storage, double the earlier example, the battery absorbs the entire solar peak and there is still reserve left in the evening: not a single kWh has to go onto the grid. The battery rises more gradually, only reaches its maximum in the afternoon (around 5pm, with 35% reserve still left) and never runs completely empty in the evening. And on pronounced days such as 26 April, MoMa can use that room to actively take power from the grid during the hours when feed-in prices are negative. Same solar panels, same habits, same MoMa control: the difference lies purely in storage.
The rule of thumb: multiply by 4
The calculation we use in our quotes is surprisingly simple: optimal battery capacity (in kWh) = solar panel power (in kWp) × 4. In practice: 5 kWp of panels calls for about 20 kWh of storage, 7 kWp for 28 kWh, 8 kWp for 32 kWh, and 10 kWp for 40 kWh. The factor 4 follows from how a typical household profile relates to a typical solar profile: enough capacity to absorb the entire midday peak and still keep enough reserve for the evening. Anyone going bigger, for example with an EV that charges, is more likely at the upper end of that range.
Why this matters more now than ever
Five years ago a marginal undersizing was less of a problem: feed-in rates were stable, dynamic tariffs had not yet broken through, and the tariff difference between morning and evening was smaller. Today the energy market is in the middle of a fundamental shift. The share of unpredictable renewable production, especially solar and wind, increases year after year, resulting in sharper price swings. At the same time demand for electricity is growing fast through the electrification of mobility and heating: more heat pumps, more EV chargers, more EVs on the grid. International tensions also leave their mark on wholesale prices.
Under such circumstances a well-sized battery is not a nice extra, but your buffer against the market. A simple check: multiply your installed PV power by 4. If the result is close to your current battery capacity, you are in good shape. If you are below it, there is often more to be gained than you suspect.
Conclusion
A well-sized installation is ultimately more than a calculation. It is the way you take your energy into your own hands: deciding yourself when you store, when you consume, when you feed back. With enough capacity you are far less dependent on what happens around you, on the market, in the world, at your supplier.
Related articles

Advanced or Expert: where your benefits come from
A solar panel generates, a battery stores, and the real work happens in between. Which layers of benefit you get depends on your energy model. We set out the structure of Advanced and Expert, and where you can find them on your bill.

Do you have green power certificates? Then curtailment is not an option
With negative prices, scaling back your production is usually the smartest move. Except if you still receive green power certificates, because that meter keeps running. Why your battery is then the way out, and which two conditions apply.

Why does the sonnenBatterie need maintenance?
Maintenance keeps your energy storage in top form. Why your sonnenBatterie occasionally schedules a full charge or trickle charge by itself, and why that is not a problem.
