Smart charging now that the normal rhythm is back
School has started, work is back in full swing, and the daily rhythm is fixed again. You can see that on the energy market too: evening prices are fairly high again these days. So it pays to watch when you use your energy.
Why the evening in particular is expensive
Around 5 pm, three things happen at once:
- the sun goes down, so your solar panels barely supply any electricity
- everyone comes home and there is cooking, washing and heating
- many cars go (out of habit) straight onto the EV charger
Demand therefore peaks just as the cheapest production drops away. You can see that in the price. Later in the evening it falls again, and at night it is at its lowest.
Now that we are coming out of summer, that effect gets sharper every week and the evening peak comes earlier. Day-ahead prices have been climbing for several weeks. That does not mean there is nothing left to do: there are still opportunities on the imbalance market, although for that you need a well-sized system, with MoMa as single point of control, so that your installation can move fast enough.
Move your heavy consumers
Heavy consumers that do not necessarily have to run right now, at that expensive time, are best put on later in the evening or at night. Your car is the heaviest consumer and therefore also the most important: a charging session of a few hours at the most expensive moment weighs more heavily than all your other appliances together. Especially because consumption at that moment is already high due to cooking appliances and other household consumers.

“What we especially want to avoid is you plugging in your car at 6 pm and your battery being drained by your car. That energy is much better used at that moment for your household, and your car charges just as well at night. If you do it anyway, we draw all the flexibility out of your battery and are forced to buy electricity at the most expensive price of the day.”
Your battery is your cheapest source of electricity at that hour. Let it work to cover the household consumption. But when it also has to work to support the EV charger, it gets used up at the EV charger, and often nothing is left for your household and nothing to play the market with. And once that battery is empty, it can no longer be used to keep peak power under control either. So that adds an extra risk of high peaks. That is something you want to avoid as a customer. And smart charging is the solution to that.
What do you need for smart charging?
Smart charging does not happen automatically for everyone. Three things are needed to make optimal use of it:
- A controllable EV charger. Specifically, an EV charger that is compatible with Smart-E-Grid. Without control, that EV charger operates outside the ecosystem and we cannot intervene in when and how fast your car charges.
- Our MoMa control. It controls your installation as a unified ecosystem, so that your EV charger, your battery and your consumption stay aligned instead of each going its own way.
- A well-sized battery. The better your battery fits your installation and your consumption, the more of your charging session can come from your own storage rather than from the grid, and the better we keep your capacity tariff under control.
Do you charge your car? Then three situations can arise
1. You have a non-controllable EV charger
Charging is 100% manual. When you plug in the car, it starts charging at the set power. What can you do then: postpone that charging session. It is then entirely up to you: ideally plug in your car only from 11 pm, because from then on we usually see prices fall. If you plug in at 6 pm, the entire charging session runs through the most expensive hours. Usually, charging less in those hours will not make the difference for you either, and the car can still be sufficiently charged.
2. You have a controllable EV charger, with a car that does not support paused charging
Paused charging means that your car supports the option of being plugged in while the control system decides when the car starts charging. If your car does not support this, charging starts immediately on plugging in and continues at your set base power. We can only increase that power as soon as there is a favourable moment, but the car keeps charging constantly. The hour at which you plug in therefore still weighs heavily here. If you plug in later and keep your base power low, most of the energy falls in the cheap hours, and on top of that we can adjust when it is interesting.
3. You have a controllable EV charger, with a car that does support paused charging
This is the most comfortable situation: you plug in your car and we automatically pause and resume your charging session according to how prices evolve. That way we move with the prices throughout the entire charging period. You do not have to think about it.
Fill in your weekly planning correctly
In each of the three situations it is important that we communicate with each other as well as possible. Otherwise we do not know when you need the car and when it is plugged in. That matters to us because we determine a consumption profile per day for each customer individually, so that we know which electricity is needed when and how much room we have to wait for opportunities. This also applies if we cannot control your EV charger, because your electric car remains the biggest consumer in the household and we want to align your battery with it.
Smart-E-Grid makes all of this easy. There is the option to submit your weekly planning. In the Smart-E-Grid app you indicate:
- on which days you will charge
- in which time slot we may charge your car
- when it has to be ready for departure
- at what minimum power charging takes place. We recommend 6 amps: slow charging stretches the charging session over more hours, which gives more moments to shift your consumption to the cheapest hours, and it keeps your power peak low.
When we receive this information from you, we can align your battery and (if controllable) your EV charger with it. That way we are not confronted with a sudden charging session while the battery is already (almost) empty. Our control will know that increased consumption is coming and will prepare the battery for it throughout the day. Again, so that you can charge at the lowest price.
Filling in the weekly planning is all that is needed. You say when the car will be plugged in and we do the rest. We use that to align when we buy electricity and how we deploy your battery. Beyond that you do not have to do anything yourself, you do not switch anything on or off manually.
How to set it up
How to set up smart charging and where to find the weekly planning, you can read in our blog. How smart charging works exactly is set out in our earlier blog about it.
In short, for these weeks:
- move what you can to later in the evening or the night
- do not plug in your car at 6 pm as a matter of course
- make sure your weekly planning is correct and keep it up to date
We do the rest.
Related articles

Energy is getting more expensive and the moment you consume counts for more and more
Anyone following this autumn's energy market sees two trends running side by side. The first determines what energy costs. The second determines how much of that you notice.

Electricity cost an average of 35.7 cents per kilowatt hour this year. Smart-E-Grid customers paid 2.3 cents overall.
We put the bills from January to September 2026 side by side, across our entire customer portfolio. What does a kilowatt hour cost on average with us, and what does that same kilowatt hour cost a household without solar panels?

More and more Flemish households are choosing a battery
The power exchange is running at more than double last year's level in September, and winter has yet to begin. Why gas is driving the price, why panels alone are not enough, and what matters when you are considering a battery.
