Your day is predictable, and that is a compliment
Most people think of electricity as something that is simply there: you press a switch, the light comes on, and at the end of the month a bill arrives. What lies in between, a whole economic machine that runs again every day, mostly stays out of sight. Anyone who understands how that system works can use it more consciously, and in a time of ever more volatile energy prices that is no longer a luxury, but simply smart.
Most households follow a strikingly regular pattern. A typical day looks like this:
| Moment | Hours | What is going on | Consumption |
|---|---|---|---|
| Morning peak | 7am - 9am | Getting up, showering, breakfast, coffee | High |
| Off-peak hours | 9am - 4pm | Everyone away at work or school; only the fridge, possibly a heat pump and some standby | Low |
| Evening peak | 5pm - 9pm | Cooking, dishwasher, laundry, shower, television, EV charging | Highest of the day |
| Night dip | 10pm - 6am | Only the strict minimum keeps running | Lowest |
An electric car that charges at night adds a second, flatter block peak during those hours, which can be perfectly planned in advance because it is predictable consumption at a predictable moment.
Three curves that together form the core
Besides that consumption pattern, two more curves play a part. Together they determine what happens to your energy at every moment of the day:
- Consumption: the pattern above, with two peaks, a trough during the day and a dip at night.
- Solar production: an arc that gets going around 8-9am, peaks around midday and dies out towards 7-8pm. Longer in summer, shorter in winter, but always the same shape.
- Battery: which every Smart-E-Grid customer has. Not a passive box, but a system that constantly shifts energy back and forth between the moment of producing and the moment of consuming. In the morning it supplies power to absorb the first peak, at midday it charges with your own sun, and in the evening it supplies again, precisely when consumption in the house is at its highest.
Consumption and sun do not coincide; the battery bridges the difference. It is a flexible buffer that we can have charge a little earlier or later, hold off discharging for an hour, or have drained extra to make room for the solar peak. Always small nudges, with one goal: keep as much of your own produced energy in the house as possible, and buy what we do take from the grid at the right moments. Without that buffer everything you consume would have to be bought at exactly that moment; with a buffer you have flexibility, and the value lies in that flexibility.
What we do every day, in four steps
Unlike other players or suppliers, we do not look at the average of a large group of customers, but at you. We call that single-point data: for each individual connection we follow the actual consumption and production patterns, day after day. That means that before a day starts, we know how your day is likely to look, not exactly, but with enough precision to buy energy for it.
This happens in four steps:
| When | Step | What happens |
|---|---|---|
| Before 11am | Forecast | Based on your historical profile we make an estimate per quarter hour for tomorrow |
| At 11am | Nominate | We pass our forecast on to the market, before we know the prices |
| Around 2pm | Prices drop | The market prices for every quarter hour of tomorrow are published on the day-ahead market |
| The day itself | Settle | Whatever deviates from the energy that was bought or sold for you is settled via the imbalance market |
Nominating and buying, before the prices are there
Every day before 11am we, like all other energy suppliers in Belgium, have to tell the market operator how much energy we expect to need tomorrow, per quarter hour, and we calculate that per individual customer. For every connection we make a forecast of expected consumption and expected generation per quarter hour, and all those individual profiles add up to one large forecast that we pass on.
An important detail: we make that nomination before we know the prices for tomorrow, because they are only published around 2pm, based on all the forecasts together. So we are effectively buying or selling blind. That is how it has to be: producers need to know how much will be consumed tomorrow in order to plan their plants or wind turbines, and the price only emerges by running all the supply and demand data through the market together.
The settlement: what really happens
The next day the real work takes place: you consume, you produce, and between what we nominated and what actually passes over the meter, a difference arises, sometimes small, sometimes larger. That difference is called imbalance, and it is settled on a separate market: the imbalance market. The day-ahead market is what we planned, the imbalance market is what gets added or left over. If we nominated too little and you consume more, we buy the difference at the imbalance price of that moment; if we nominated too much and you consume less, we sell the surplus back, again at the price at that moment.
Prices on the imbalance market are near real time: they form during the quarter hour and are published by grid operator Elia about 2 minutes after it ends, first as a non-validated price. Belgium has worked for a few years with a symmetrical imbalance price: the same price applies to whoever took too much and whoever took too little, only the direction of the payment reverses. Anyone who deviates in the "right" direction, for example drawing slightly less at a moment when the entire Belgian grid is tight, is rewarded; anyone who deviates in the "wrong" direction has to pay extra.
Why day-ahead and imbalance sometimes move in opposite directions
The two markets on which your kilowatt hour is settled behave completely differently:
| Day-ahead market | Imbalance market | |
|---|---|---|
| Visibility | Visible: prices are published, the media report on them, customers check their apps | Invisible: lives behind the scenes |
| Pace | Once a day, for all quarter hours of tomorrow | Near real time, in minutes |
| Role | What we planned | What gets added or left over |
Both are equally relevant. And precisely because day-ahead is visible, a paradox arises: when everyone sees the same negative day-ahead prices on a sunny Sunday, everyone starts doing the same thing at the same time (throttling inverters, EVs suddenly starting to charge, batteries being drawn full), and the expected surplus flips into an unexpected shortage on the grid. The imbalance price reacts immediately and can at the same time become sharply positive: that is the system straightening itself out.
The imbalance price is also very volatile: we see more and more often that the price flips from positive to negative or the other way round within a single quarter hour. Two prices alternate in the process:
- MIP (Marginal Incremental Price): the grid has a shortage, and consumption becomes expensive.
- MDP (Marginal Decremental Price): there is a surplus, and consumption is actually rewarded.
A concrete example: on a sunny Sunday the day-ahead price for 2pm-3pm is -10 cents per kWh, and we had nominated that you would feed in little during that hour. But because thousands of installations throttle their production at the same time, an unexpected shortage arises on the grid and the imbalance price shoots to +40 cents per kWh. By feeding in some extra at that moment, on top of what was nominated, you create positive imbalance precisely when the grid asks for it, and you receive the imbalance price of +40 cents on those non-nominated extra kWh.
Your total energy cost therefore consists of two layers: the planned purchase on the day-ahead market, and the settlement on the imbalance market. That second layer is not a problem, but an opportunity that we use for you. The better our nomination is right and the more stable your behaviour, the more opportunities we can seize in that second layer.
Three levers that make the difference
Nominating and buying is one thing, but on the day itself we also have to be able to react to what happens. That only works if three elements are in place: two physical ones that give us room, and one digital one that controls everything.
| Lever | What we can do with it |
|---|---|
| A well-sized battery | Have it charge a little earlier, wait a while before discharging, or deliberately keep room free to take cheap power from the grid later. The bigger that buffer, the more ways we have to match your actual consumption and generation to the markets |
| A curtailable inverter | Steer the inverter smartly at moments when the market penalises feed-in, for example at negative feed-in prices on the imbalance market. That protects you from moments when feeding in would cost you money, because your battery cannot always store all the solar production |
| MoMa control | Steering on your unique profile instead of on the average of a large group of customers. Every decision, charging, discharging, adjusting, starts from the data of your connection |
MoMa, a well-sized battery and a curtailable inverter together form the golden combination.
In practice: what can you do?
Our nomination on the day-ahead market is in essence risk management: we buy in advance what we expect to need, to avoid being left without flexibility later. The more regular your consumption pattern, the more accurately we can estimate, and the more flexibility is left for the imbalance market, where the real opportunities present themselves near real time.
A few things that really make a difference:
- Schedule big consumers at fixed moments: your EV charger, heat pump or pool pump are precisely the big loads with the most impact on the system. The weekly planning in the Smart-E-Grid app helps with that.
- Shift to the sunny hours between 11am and 4pm where possible: an EV charging then often literally costs you nothing.
- Avoid "everyone at once" moments: for example when all of Flanders is cooking at 7pm and switching on heavy appliances.
- Trust the Smart-E-Grid control: it knows your profile and the markets, and automatically sticks to the regular pattern the system needs.
Do not forget the holiday function either: a few days away from home completely changes your consumption pattern, and by indicating that in the app, we adjust our forecasts so the system keeps working optimally for you during your absence too.
Important: do not go freewheeling yourself. We see it too often: a customer hears about negative prices in the news and manually switches on big consumers to quickly seize an opportunity. Well meant, but almost always counterproductive, because you are looking at the wrong market. What the media shows, the day-ahead market, is only one layer; at that same moment the invisible imbalance market can give the opposite signal. Moreover, little consumption was planned in your profile for that moment, so the energy was not bought, and the system then has to do everything to straighten out your unexpected consumption, which can turn out expensive precisely there.
A market that works for you
The energy market is not a black box. Every day three moments play a role: our nomination before 11am, the price setting around 2pm, and the settlement the day after on the imbalance market. Value is hidden in each of those moments for anyone who understands the system and tunes in to it a little. With a Smart-E-Grid system and one of our partner energy suppliers (Elindus, Dots Energy or Holland Energie) your installation is ready for what comes next: more renewables, more fluctuations, more dynamics. Besides these energy markets there are also emergency markets that continuously keep the Belgian grid in balance, and Smart-E-Grid supports the grid that way too.
Related articles

Advanced or Expert: where your benefits come from
A solar panel generates, a battery stores, and the real work happens in between. Which layers of benefit you get depends on your energy model. We set out the structure of Advanced and Expert, and where you can find them on your bill.

Do you have green power certificates? Then curtailment is not an option
With negative prices, scaling back your production is usually the smartest move. Except if you still receive green power certificates, because that meter keeps running. Why your battery is then the way out, and which two conditions apply.

Why does the sonnenBatterie need maintenance?
Maintenance keeps your energy storage in top form. Why your sonnenBatterie occasionally schedules a full charge or trickle charge by itself, and why that is not a problem.
